Thermo Fisher Scientific CyberScan PC 5000 User Manual
Page 69
Instruction Manual
CyberScan PC5500/ 5000
64
6.12 Set Print Interval
Set pH Print Interval
Current INTERVAL
timed
enter
1 2 3
4 5 6
7 8 9
BS 0 .
manual
You have three options for setting the print interval: manual printing,
stable reading printing, and timed interval printing.
For manual printing of data
In this mode, data is printed only when you touch print on the pH
(mV, Ion, Conductivity) Measure screen.
1. Access the Set Print Interval screen from the pH (mV, Ion,
Conductivity) Setup screen. The current print interval is displayed
on the screen.
2. Touch
MAN to set the meter for manual printing.
3. Touch
enter to accept the print interval mode and return to the
pH (mV, Ion, Conductivity) Setup screen.
Printing is now done manually by touching print on the Measure
screen.
OR
Touch exit to return to the pH (mV, Ion, Conductivity) setup
screen, without making any changes.