Thermo Fisher Scientific CyberScan 6000 Series Meters v.2 - Manual (Page 13)

98
Resistivity Setup
PC6000, CON6000, PC6500 and PCD6500 meters
Technology Made Easy ...
To Set Data Storage Criteria
This screen allows you to select which criteria are stored in the data logger with the measurement
when you store the data. The status of the current data storage criteria is displayed on the
screen. The criteria option is active if ON appears to the right of the option. It is inactive if OFF
appears to the right of the option. Any active criteria will be stored on demand.
The Resistivity Data Storage Criteria is set the same way as previously described in Conductivity
Setup. See ‘Conductivity Setup: Data Storage Criteria’ section for instructions.
To Set Display Criteria
This screen allows you to choose what information you would like to be displayed on the
resistivity Measure screen, particularly the information contained in the data box at the bottom of
the Measurement screen. The status of the current display criteria is displayed on the screen.
The criteria option is active if ON appears to the right of the option. It is inactive if OFF appears to
the right of the option.
The Resistivity Display Criteria is set the same way as previously described in Conductivity
Setup. See ‘Conductivity Setup: Set Display Criteria’ section for instructions.
To View Stored Data
The PC6000, CON6000, PC6500 and PCD6500
have a memory capacity to store up to 1000
data points. The View Stored Data screen allows you to sort and look at specific data points
stored in the meter based on the meters memory capacity. The stored data can be sorted by any
of the parameters available in the screen header.
The meter stores resistivity data under the following parameters:
Reading Temperature Coefficient
Date / Time / Channel Cell Type
Sample Id Last Standardizations
Temperature Meter Model / Serial No
Reference Temperature Operator
Viewing Stored Resistivity Data is done the same way as previously described in Conductivity
Setup. See ‘Conductivity Setup: View Stored Data’ section for instructions.