Thermo Fisher Scientific CyberScan 6000 Series Meters v.2 - Manual (Page 6)

91
Conductivity Setup: View Stored Data
PC6000, CON6000, PC6500 and PCD6500 meters
Technology Made Easy ...
The PC6000, CON6000, PC6500 and PCD6500 have a memory capacity to store up to 1000
data points. The View Stored Data screen allows you to sort and look at specific data points
stored in the meter based on the meters memory capacity. The stored data can be sorted by any
of the parameters available in the screen header.
The meter stores conductivity data under the following parameters:
Reading Temperature Coefficient
Date / Time / Channel Cell Type
Sample Id Last Standardizations
Temperature Meter Model / Serial No
Reference Temperature Operator
To View Stored Data
1. Touch the View button in the conductivity Setup screen.
Function buttons on View Stored
Data Screen
Touch OK to go back to the Conductivity
Setup screen from the View Stored Data
screen.
When you touch the Help button, information
about the current screen appears. This
information includes step-by-step instructions
for operating the meter from the current
screen and possible applications information
for that screen.
Touch Delete to delete a selected data point
from the list. To delete a data point, first
touch the data point you want to delete then
touch the Delete button.
Touch Delete All to delete all the data point
in the memory.
Touch Print to print all the data points in the
memory.
See next page for Export View and Header
(or Export View) explanation.
You can only log 1000 data points at a time. To clear space for new data points, you have to
delete the same number of old data points as you want to add new data points.