Thermo Fisher Scientific CyberScan 6000 Series Meters v.2 - Manual (Page 14)

99
TDS Setup: TDS Setup Screen
PC6000, CON6000, PC6500 and PCD6500 meters
Technology Made Easy ...
Available in PC6000, CON6000, PC6500 and PCD6500 meters, the TDS Setup screen present
many options to control the operating parameters of the meter. The meter is factory set with
regard to these options, and is ready for use under most circumstances (see ‘Appendix: 6000
Series Meters Factory Default Settings’ section for default settings). The operating parameters
of the TDS mode can be set and controlled from the TDS setup screen. The TDS Setup section
will guide you through the various options available in the TDS setup mode.
Function Buttons on TDS Setup Screen
Touch OK to confirm TDS Setup and return to the TDS Measure screen.
Touch Cancel to exit and return to the TDS Measure screen without confirming TDS Setup.
Touch View to view all TDS data points stored in memory. See ‘TDS Setup: View Stored Data’
section for details.
When you touch the Help button, information about the current screen appears. This information
includes step-by-step instructions for operating the meter from the current screen and possible
applications information for that screen.
Touch Reset to reset all TDS Setup Criteria to the factory default.
Example: - PCD6500 TDS Setup screen