Thermo Fisher Scientific CyberScan 6000 Series Meters v.2 - Manual (Page 8)

93
Resistivity Setup: Resistivity Setup Screen
PC6000, CON6000, PC6500 and PCD6500 meters
Technology Made Easy ...
Available in PC6000, CON6000, PC6500 and PCD6500 meters, the resistivity Setup screen
present many options to control the operating parameters of the meter. The meter is factory set
with regard to these options, and is ready for use under most circumstances (see ‘Appendix:
6000 Series Meters Factory Default Settings’ section for default settings). The operating
parameters of the resistivity mode can be set and controlled from the resistivity setup screen. The
resistivity Setup section will guide you through the various options available in the resistivity setup
mode.
Function Buttons on Resistivity Setup Screen
Touch OK to confirm resistivity Setup and return to the resistivity Measure screen.
Touch Cancel to exit and return to the resistivity Measure screen without confirming resistivity
Setup.
Touch View to view all resistivity data points stored in memory. See ‘Resistivity Setup: View
Stored Data’ section for details.
When you touch the Help button, information about the current screen appears. This information
includes step-by-step instructions for operating the meter from the current screen and possible
applications information for that screen.
Touch Reset to reset all resistivity Setup Criteria to the factory default.
Example: - PCD6500 Resistivity Setup screen