Thermo Fisher Scientific CyberScan 6000 Series Meters v.2 User Manual
Page 76
161
Appendix: Setting the 6000 Series Meters User Profiles
PH6000, PC6000, PH6500, CON6000, DO6000, PC6500 and PCD6500 meters
Technology Made Easy ...
The 6000 series meters are equipped with a User Profiles setup or the User Profile Management
Application. Setting user profiles saves an individual user unique Setup preferences, calibration
data and stored data. The meter can be used without setting a user profile but it will recognize all
users as Default.
Accessing User Profile Screen
1. Touch Home on any measurement or the Mode screen to access the Home screen.
2. Double tap on AdminUser. The User Login dialog box will appear.
3. Touch the User ID box. The alphanumeric keypad will appear. Key in your User ID or
"admin". To set up new users or delete users you must log in using the "admin" user ID.
The BS key will allow you to backspace to remove a character that was incorrectly
entered. Press the Enter key.
4. Touch the Password box, use the
alphanumeric keypad on the screen to key
in the password.
NOTE: When entering the User Profiles
setups for the first time, use admin as the
Password. Press the Enter key. The User
Login screen will appear with User ID and
Password entered.
5. Touch Login to enter the User Profiles
screen.
From this screen you can update Password and Company Name information by tapping
in the appropriate boxes, if you are logged in as a user. If you are logged in as "Admin"
user ID you can add and delete users.
Adding User Profiles
1. After logging in under User ID "admin" the User Detail fields will show information for
"Admin". Touch Clear to clear all information from the User detail box to enter a new
user. You can now begin entering information for new users
2. Touch the User ID box; use the alphanumeric keypad on the screen to key in the new
User ID. The User ID cannot exceed 10 characters. Press Enter key to confirm User ID.
3. Touch the Password box; use the alphanumeric keypad on the screen to key in a
Password. The Password cannot exceed 12 characters. Press Enter key to confirm
Password.
4. Touch the Confirm Password box; use the alphanumeric keypad on the screen to key in
the same password used in step 3. Press Enter key to confirm Password.
5. Touch the Company Name box; use the alphanumeric keypad on the screen to key in
the Company Name. Press Enter key to confirm Company name.
6. Touch Add, a dialog box will ask "Are you sure, you want to add this user?" Touch Yes
or No. If you touch Yes, the new user will be added. If you touch No, you may still edit
the current user.
NOTE: The administrator has authority to add or delete user names. Users may modify their
password and company name only by entering User ID and Password in place of Admin on
the User Login screen.