Thermo Fisher Scientific CyberScan 6000 Series Meters v.2 - Manual (Page 82)

167
Appendix: 6000 Series Meters Print Function
PH6000, PC6000, PH6500, CON6000, DO6000, PC6500 and PCD6500 meters
Technology Made Easy ...
)
Kindly note that the 6000 series meter functions only with printers that features PCL 5e
(printer command language 5 enhanced) language. Host-based printer with PCL 5e language
relies on the computer’s processor to generate printable pages. Non PCL 5e language
printer triggers 6000 meter to modify its internal register and can cause the meter to crash.
The 6000 series meter allows you to send data to the selected PCL 5e Laser or HP LaserJet
1022n through the USB-A port located at the back panel of the 6000 series meter.
To print using USB-A
1. Power on the 6000 Series meter and go to single
measurement mode.
2. Connect HP printer to USB-A port on the back of the
6000 Series meter.
3. Enter Sample ID.
4. Tap Log data Icon.
5. On the Measure screen, touch Print to initiate the print function.
6. The Print dialog box is displayed on the screen.
7. Select the correct printer using the Printer drop down box selection.
8. Set the Port drop down box selection to LPT1.
9. Make all other selections as needed and then touch OK to start sending data.
When a HP 1022 printer is connected to 6000 Series meter, you can select either PCL
Laser or HP LaserJet 1022n and port LPT1 from the print dialog box as shown in
above diagrams.
Print icon will appear only in
single channel measurement
mode.