Thermo Fisher Scientific CyberScan 6000 Series Meters v.2 - Manual (Page 24)

109
Salinity Setup
PC6000, CON6000, PC6500 and PCD6500 meters
Technology Made Easy ...
To Set Alarm Limits
This option allows you to set alarm limits for the salinity measuring mode. If the salinity value of
the measurement is outside of the boundaries set by the minimum and maximum limits, audible
and visual warnings will let you know that your sample measurement was outside of the set
limits.
The Alarm Limit can be set from 0 to 90.000 ppt.
To set Alarm Limits
1. Touch ON or OFF to set the status of the alarm of salinity mode
2. Touch the Low box and use numeric keypad to enter the new limit values.
3. Touch Enter on the keypad to accept this limit and return to the salinity Setup screen.
4. Touch the High box and use numeric keypad to enter the new limit values.
5. Touch Enter on the keypad to accept this limit and return to the salinity Setup screen.
To Set Print Criteria
This screen allows you to select which criteria are printed with the measurement when you print
the data. The status of the current print criteria is displayed on the screen. The criteria option is
active if ON appears to the right of the option. It is inactive if OFF appears to the right of the
option. Any active criteria will be printed on demand.
The Salinity Print Criteria is set the same way as previously described in Conductivity Setup.
See ‘Conductivity Setup: Set Print Criteria’ section for instructions.