West Control Solutions KS 800 CANopen Interface Manual - Manual (Page 37)

KS 800 CAN-Interface
9.2 Data plausibility check during transmission
Caution!
The configuration data are not checked by the instrument. (This check is done only in the engi-
neering tool.)
The parameter data are checked for their limits.
9.3 Table of allocation of firmware version, operating version, series number and en-
gineering tool.
Date Series-
number
Firmware
version
Operat.
version
E-Tool-
version
3.8.97 8330 1.0 1 1.0
10.9.97 8334 1.1 1 1.1
28.10.97 8335 1.2 1 1.1
16.12.97 8337 1.3 1 1.1
8.4.98 8341 1.3 1 1.3
11.5.98 8341 1.3 1 1.3
23.9.99 8358 2.0 2 1.4
15.12.99 8361 2.1 2 2.0
7.3.00 8363 2.1 2 3.0SR1
7.3.00 8363 2.2 2 3.0SR1
7.3.00 8364 2.3 3 3.1SR1
10.7.00 8366 2.4 3 3.1SR1
30.3.01 8376 2.5 4 3.2SR3
13.11.01 8384 3.0 5 3.4SR1
19.8.02 8393 4.0 6 1.4SR1
(BlueControl)
9499 040 49511 37