West Control Solutions KS 800 CANopen Interface Manual User Manual
Page 6
Advertising
KS 800 CAN-Interface
Network management:
For communication monitoring, KS800 offers the possibility of "nodeguarding", which enables the
master to detect whether a KS800 is connected to the bus and whether the communication to
the controller is ensured.
Adjusting the node ID (node address) and CAN-baudrate required for identification of a CAN unit
is done using the KS800 Engineering Tool via the diagnosis interface.
Adjusting via CAN-Bus is also possible (see chapter 7).
6
9499 040 49511
Advertising