NORD Drivesystems BU0100 - Manual (Page 26)

Options / Accessories SK 1xxE
26 Technical modifications observed BU 0100 GB
5.3 System plug for power input or motor output
All series SK 1xxE motor starters can be equipped with a Harting HAN 10E system plug. (see illustration). The
connector can serve as power input or motor output.
Harting plug for SK 140E :
The placement of the Harting plug is always on the opposite side of the screwed cable gland and status
indicator. The approximate dimensions are listed below.
Type designation:
SK 140E-1-O-MS Mat. No. 275101410
SK 140E-1-BSG2-MS Mat. No. 275101415
Harting plug for SK 150E / SK 160E :
The placement of the Harting plug is always on the opposite side of the screwed cable gland and status
indicator. The approximate dimensions are listed below.
In combination with an AS interface (as per 4.2.4 ), which is integrated into the terminal box, the plug
connector is mounted flush left on the terminal box (Æ See also Section 5.5.2 ).
Type designation:
SK 150E-1-O-MS Mat. No. 275101510
SK 150E-1-BSG2-MS Mat. No. 275101515
SK 160E-1-O-MS Mat. No. 275101610
SK 160E-1-BSG2-MS Mat. No. 275101615
52 mm
92 mm
110 mm
52 mm
110 mm
88 mm 56 mm