NORD Drivesystems BU0100 - Manual (Page 27)

Options / Accessories SK 1xxE
BU 0100 GB Technical Modifications Reserved 27
5.4 Signal plug M12 for control signals
A signal plug M12 can be inserted for the supply of the 24 V control voltage as well as the connection of the
signals RUN and OK. This plug-in connection facilitates a quick replacement of a drive without problems.
The signal plug M12 is inserted into the M16 screwed cable gland of the terminal box.
Pin Color Terminal Function
1
brown
[43] 24V DC
2
white
[21] RUN-RIGHT
3
blue
[40] GND
4
black
[17] OK
5
grey
[22] RUN-LEFT
Signal plug for
SK 140E / SK 150E / SK 160E
(Mat. No. 18550980)
SK 150E / SK 160E
117 mm
40 mm
SK 140E
47 mm
36 mm