Brother PE-DESIGN Ver.432 - Manual (Page 155)

145
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
5 Add details as you would with a normal embroidery picture.
When sewing, proceed as follows:
1 Place the appliqué material on the machine and start sewing. At this step, only the APPLIQUE
MATERIAL outline will be sewn.
2 Remove the appliqué material from the machine and cut along the outline.
3
Place the backing material on the machine and start sewing. At this step, only the APPLIQUE POSI-
TION outline will be sewn.
4 Affix the appliqué on the marked position with a small amount of fabric glue.
5 Restart sewing. At this step, the APPLIQUE outline will be sewn.
6
Sew the other details of the picture.
Note that the sewing order will be
MATERIAL ® POSITION ® APPLIQUE .
■ Stitch
Purpose: Sets the stitch for outline, region inside, text, manual punching pattern and
imported pattern (after the Stitch to Block function has been applied).
Available: When the cursor is in the selection mode, the Line sew type and Region sew type
selectors are displayed (if they have not been turned off with the Line sew or
Region sew buttons).
When you start one of the drawing modes or select an existing pattern, the sew
type button for that pattern appears.
When you are in the text or manual punching mode or after applying a Stitch to
block setting to an imported pattern.
Operation:
1 Click the sew type selector.
The available options display.
For outlines, Zigzag, Running and Motif stitches are available.
For regions, Satin, Fill, Programmable Fill and Motif stitches are available.
2
Click the desired stitch.
The setting applies to all the patterns of the same categories that you will create until you change it.
If a pattern is selected, the setting also applies to that pattern.
NOTE:
You can set the stitch attributes for the selected line and region stitches in the
Sewing attribute Set-
ting dialog.
When you select Prog. fill Stitch or Motif Stitch , you also need to select a pattern in the Sewing
Attribute Setting dialog, as there is no default programmable stitch setting.
See also: “Line sew” on page 141, “Region sew” on page 142 and “Sewing Attribute Setting”
on page 177
APPLIQUE MATERIAL / APPLIQUE POSITION / APPLIQUE