Brother PE-DESIGN Ver.432 User Manual
Page 31
21
For the leaves:
Click the
Region color
button
on the Sewing Attributes bar to display the
Region Thread Color
dialog, then select the
LEAF GREEN
color. Refer to the list of color names on page 230.
The
Region color
button
shows the selected color.
Click the
Region sew type
selector
on the Sewing Attributes bar, then click
Fill Stitch
.
To set the characteristics of the fill stitch, click
Sew
on the menu bar, then click
Sewing Attribute
on
the submenu. You can also click the button of the Toolbar shown below.
The
Sewing Attribute Setting
dialog appears. The dialog displays the default settings for the region
stitch.
NOTE:
Using different directions for different regions can add contrast and improve the appearance of the
embroidery.
NOTE:
To be able to apply the sewing settings to a region, the region has to be closed. If you cannot apply
any setting to a given region, go back to the Figure Handle stage and make sure that region is closed.
Edit any faulty line with the Point Edit tool. For details on how to edit the figure handle image, see
“Point Edit Mode” on page 64.
◆
Set the direction of the fill stitch as
explained in the “NOTE” below.
◆
Click on the regions of the leaves to
which you want to apply a setting.
◆
Repeat the same operation for each
stitch direction.
Set the direction to 45˚ and click.
Set the direction to 90˚ and click.
Set the direction to 135˚ and click.