Brother PE-DESIGN Ver.432 - Manual (Page 211)

201
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
4 If you don’t type anything, this message will appear.
5
When you click OK on the Prefix Setting dialog with a valid prefix, this message displays.
Note that it is better to switch your computer off before connecting any peripheral.
6 If the card module is ready and no problems are detected, the application starts transferring the
data from the card to the specified folder. The application informs you that the transfer is in
progress.
7 Wait until the transfer is completed.
When the transfer is complete, the
Installation is completed message displays.
8
The Install Embroidery Card dialog reappears, showing the new file.
◆ Click OK to remove the message
and return to the previous dialog.
◆ Check that the card module is con-
nected and powered, and that a card
is inserted. If necessary, connect the
module and its power adaptor, and
insert a card.
◆ Click OK to start installing.
◆ Click Cancel to exit.
◆ Click OK to remove the message.
◆ Check that the new file appears in
the
Files box.
◆ Click Close to remove the dialog
from the screen.