Select sewing area – Brother PE-DESIGN Ver.432 User Manual
Page 197
187
■
Select Sewing Area
Purpose:
Sets the sewing area
Shortcut key:
No shortcut key for this function
Toolbar:
No button for this function
Operation:
1
Click
Sew
, then
Select Sewing Area
.
This dialog displays.
With
Design Page area
, the patterns will be sewn so that the place where the needle is when you
start coincides with the center of your Design Page.
NOTE:
When
Design Page area
is selected, the dimension of the pattern matches the size of the Design
Page, therefore reducing the ability to move a pattern around the layout screen of your embroidery
machine.
With
Use existing design
area
, the patterns will be sewn so that the place the needle is when you
start coincides with the center of the actual patterns.
NOTE:
When
Use existing design
area
is selected, the actual pattern size is maintained, therefore allowing
greater mobility when using the layout function of your embroidery machine.
See also:
“Design Page Property” on page 195
◆
Select
Design Page area
or
Use existing
design area
.
◆
Click
OK
to confirm.
◆
Click
Cancel
to exit.
Design Page (on your screen)
Sewing area = Use existing design
Sewing area = Design Page
A
A
A