Output to clipboard, Import figure, Output to clipboard • import figure – Brother PE-DESIGN Ver.432 User Manual
Page 94
84
2
If the current Design Page is edited, you will be asked whether you want to save the changes, for
example:
3
Depending on the stage you are currently using and the editing you did, the file to be saved is a
*.pel
file or a
*.pem
file or both.
See also:
“Open” on page 81, “Save” and “Save As” on page 85
■
Output to Clipboard
Purpose:
Copies the Stage 1 image data to the clipboard.
Shortcut key:
No shortcut key for this function
Toolbar:
No button for this function
Operation:
1
Click
File
, then
Output to Clipboard
. (This can only be done when there is image data in the Stage
1 design page.)
The image data in the design page is copied to the clipboard.
■
Import Figure
Purpose:
Adds a
*.pem
file to your Design Page (available only in Stage 3).
Shortcut key:
Toolbar:
Operation:
1
Click
File
, then
Import Figure
.
A dialog similar to this will display.
The selected pattern will be added to your Design Page.
See also:
◆
Click
Yes
to save the Design Page first.
◆
Click
No
to abandon the Design Page.
◆
Click
Cancel
to do anything else (for
example, modify the current Design Page
or saving it with another file name).
◆
Select the drive, the folder and the
file name.
◆
Click
Import
to open.
◆
Click
Cancel
to exit.
F8