Brother PE-DESIGN Ver.432 - Manual (Page 92)

82
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
Operation:
1
Click File , then Open .
A Open dialog similar to this will display.
2 The selected file opens immediately if your current Design Page is not edited.
If the current Design Page is edited, you will be asked whether you want to save the changes.
3
Depending on the stage you are currently using and the editing you did, the file to be saved is a
*.pel file or a *.pem file or both.
See also: “New Line Image” on page 78, “Save” and “Save As” on page 85
■ Select TWAIN device
Purpose: Selects which TWAIN device installed in the computer to use.
Shortcut key: No shortcut key for this function
Toolbar: No button for this function
Operation:
1
Click File , then Select TWAIN device .
A dialog similar to this will display.
From the devices in the display, select which device to use and highlight that device.
NOTE:
If there is no TWAIN device installed, there will be no names displayed on the Sources list.
Use this function after installing the driver software for the TWAIN device you want to use.
See also: “Input from TWAIN device” on page 83
◆ Select the drive, the folder and the file
name.
• Be sure to select the right type of file
extensions in
List Files of Type .
• If the Preview check box is checked, the
content of the selected file displays in
the preview window.
◆ Click Open or double-click the file name
to open the file in Design Center.
◆ Click Cancel to exit.
◆ Click Yes to save the Design Page first.
◆ Click No to abandon the Design Page.
◆ Click Cancel to do anything else (for
example, modifying the current Design
Page or saving it with another file name).
◆ Click Select to choose the selected
device and close the dialog.
◆ Click Cancel to ignore the operation
done to change the device and close
the dialog.