Brother PE-DESIGN Ver.432 - Manual (Page 99)

89
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
Operation:
1
Select one or more outline data (Stage 3 only).
2 Click Edit , then Delete .
The selected outline data are removed from the screen. Since they are not saved in the clipboard,
the only way to make them reappear is to use
Edit – Undo .
See also: “Undo” and “Cut” on page 87
■ Mirror – Horizontal
Purpose: Flips the selected data up/down.
Shortcut key: +
Toolbar:
Operation:
1 Select one or more outline data (Stage 3 only).
2 Click Edit , then Mirror , then Horizontal .
A horizontal mirror image (top and bottom inverted) of the outline data appears on the screen.
Two successive executions of this command restores the original image.
See also: “Flipping a pattern horizontally or vertically” on page 63 and “Mirror – Vertical”
below
■ Mirror – Vertical
Purpose: Flips the selected data left/right.
Shortcut key: +
Toolbar:
Operation:
1
Select one or more outline data (Stage 3 only).
2 Click Edit , then Mirror , then Vertical .
A vertical mirror image (left and right inverted) of the outline data appears on the screen.
Two successive executions of this command restores the original image.
See also: “Flipping a pattern horizontally or vertically” on page 63 and “Mirror – Horizontal”
above
Ctrl H
Ctrl J