Brother PE-DESIGN Ver.432 - Manual (Page 192)

182
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
Note on the Programmable Fill Stitch:
When setting the stitch and pattern directions of a programmable stitch, take note that whenever
the stitch and pattern direction settings cause the stitch to be sewn in the same direction as a line
in a stitch pattern, that line will not be sewn.
Use the preview function of your application to view exactly how your stitch pattern will be sewn
and set the stitch direction and pattern direction according to the selected stitch or to the effect
that you want to produce. To get an even better view, make test samples of different settings.
H-Arrange
(Horizontal Arrange)
Sets the horizontal arrangement of the
pattern. For patterns like , patterns will
be arranged along the line as shown
below.
V-Arrange
(Vertical Arrange)
Sets the vertical arrangement of the pat-
tern. For patterns like , patterns will be
arranged along the line as shown below.
Row Offset
When the pattern arrangement is offset, sets the amount of
offset for each row.
Range: 0 - 10 mm (0.00 - 0.39 inch)
Default: 0 mm (0.00 inch)
Direction
Allows you to rotate the angle of the Motif patterns.
Range: 0 - 359 degrees
Default: 0 degrees
Run Pitch
Sets the pitch of the sewing.
Range: 1 - 10 mm (0.04 - 0.39 inch)
Default: 2 mm (0.08 inch)
Feathered Edge only:
Feathered Side
Sets which side of the sewing direction to apply the Feathered
edge setting to.
When creating data in Manual Punch mode, the Topside has
organization points 1-3, and the Bottom side has organization
points 2-4.
Top : Feathered Edge is sewn on the Topside.
Bottom : Feathered Edge is sewn on the Bottomside.
Pattern
Selects a pattern to use with the Feathered Edge.
Click
Select Pattern , and the Browse dialog will open.
Scroll through the available Feathered Edge patterns and dou-
ble-click the desired pattern or click
OK to select the pattern
Max length
Sets the length of feathered edge.
Range: 0.2 - 100 mm (0.01 - 3.94 inch)
Default: 3 mm (0.12 inch)
Normal:
Mirror:
Alternate:
Normal:
Mirror:
Alternate:
(Example of a feathered side pattern)