Brother PE-DESIGN Ver.432 - Manual (Page 176)

166
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
NOTE:
The maximum value that can be entered is the largest value that will not allow the pattern to
exceed the size of the Design Page.
The minimum value is 1 mm (0.04 inch).
See also: “Select System Unit” on page 196
■ Numerical Setting-Rotate
Purpose: Rotates the selected pattern numerically.
Shortcut key: No shortcut key for this function
Toolbar: No button for this function
Operation:
1 Select one or more patterns.
2 Click Edit , then Numerical Setting , then Rotate .
The Rotate dialog appears.
NOTE:
The range of values that can be entered is between 0 and 359 degrees, in 1degree increments.
■ Center
Purpose: Moves the selected object to the center of Design Page.
Shortcut key: +
Toolbar: No button for this function
Operation:
1 Select one or more objects.
◆ The desired rotation angle can be entered
by either typing in a value or clicking the
arrows to select the desired value.
Select
0 degree to leave the pattern
unchanged.
◆ Click OK to confirm.
◆ Click Preview to view the pattern rotated
the specified angle in the Design Page.
◆ Click Cancel to exit without making any
changes.
Region (without line) Region + line
Ctrl M