Brother PE-DESIGN Ver.432 - Manual (Page 107)

98
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
2 When you click OK , the Figure Handle Image displays and you are in Stage 3.
In Stage 3, you can edit the patterns, by moving, deleting and inserting points and by drawing
lines. Use the zooming tools available whenever you need to zoom your pattern.
See also: “To Original Image” and “To Line Image” on page 95, “To Sew Setting” below,
“Grid Setup” on page 90 and “Design Page Property” on page 93
■ To Sew Setting
Purpose: Moves from Stage 3 to Stage 4.
Shortcut key: No shortcut key for this function
Toolbar:
Thinning
Process
This setting determines how the black lines of the line image are converted into pat-
tern lines.
ON : the black lines are replaced with pattern lines following the center of the black
lines. You can set the degree of detailedness with the slider (if the degree is high,
even very thick black lines will be replaced with a center line).
OFF : the black lines are replaced with pattern lines following the border of the black
lines.
ON
OFF