Brother PE-DESIGN Ver.432 User Manual
Page 13
4
4
Wait until the panel shown here is replaced with
the
Welcome
dialog shown next.
5
Click
Next
to proceed with the installation.
•
If you have other Windows applications running,
click
Cancel
to exit, close all the other applications
and start again.
6
Click
Next
to install in the default folder.
•
If you want to install into another folder, click
Browse
. Select a drive and a folder (if necessary,
type the name of a new folder). When the desired
folder is selected, click
OK
. The
Choose Destina-
tion Location
shows the selected folder. Click
Next
to install in that folder.
•
Click
Back
to move back to the previous step.
•
Click
Cancel
to exit.
When you click
Next
on the
Choose Destination Loca-
tion
dialog, installation starts.
7
Wait until this panel is replaced with the next dia-
log.
•
Click
Cancel
to exit.
When the setup is completed, this dialog appears.
8
If you want to display the README file, just click
Finish.
•
If you don’t want to display the README file, click
the check box to delete the check, then click
Finish
.
5
6
8