Brother PE-DESIGN Ver.432 - Manual (Page 136)

127
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
■ Color
Purpose: Sets the thread color for outline, region inside, text, manual punching pattern and
imported pattern (after the Stitch to Block function has been applied).
Available: When the cursor is in Selection mode with nothing selected, the Line color and
Region color buttons are displayed (if they have not been turned off with the Line
sew or Region sew buttons).
When you start one of the drawing modes or Text Input mode, or select an existing
pattern, the Color button for the corresponding pattern appears.
Operation:
1 Click the color button.
In Region setting mode, the
Region Thread Color dialog displays and in Line setting mode, the Line
Thread Color dialog displays. The same color settings are available in both dialogs.
The setting applies to all the patterns of the same categories that you will create until you change
it. The color button of each category shows the current color for that category.
If a pattern is selected, the setting also applies to that pattern.
Note that the color name shown on the dialog will be displayed on sewing machines that can dis-
play color names.
See also: “Line sew” on page 125 and “Region sew” on page 126
Special colors
◆ Click the desired color.
• The four last spools have a special function.
See “Special colors” below.
• For a list of the different color names, see
page 204.
◆ Click OK to confirm.
◆ Click Cancel to exit.
NOT DEFINED
APPLIQUE MATERIAL
APPLIQUE POSITION
APPLIQUE