Print setup – Brother PE-DESIGN Ver.432 User Manual
Page 148
139
2
If you click
OK
, your current embroidery patterns will be saved on the card. A
Now writing
message
displays while the data is being transferred to the card.
After a while, the following message will appear.
See also:
“Save” on page 137, “Save As” on page 137
■
Print Setup
Purpose:
Allows you to change the printing settings for previewed embroideries.
Shortcut key:
No shortcut key for this function
Toolbar:
No button for this function
Operation:
1
Click File, then Print Setup.
A Print Setup dialog similar to this will display.
You can choose to print the preview image on one or two pages for one pattern or one hoop posi-
tion.
The Actual Size will print two pages:
The image in its actual size on the first and the dimensions of the embroidery, the sewing color
order and the needle count on the second page. The file name is printed on both pages.
The Reduced Size will print a reduced illustration of the image and all the above mentioned items
on a single page.
NOTE:
If a Design Page for an extra-large embroidery frame (130
×
300 mm, 300
×
130 mm, 100
×
172
mm, or 172
×
100 mm) is selected, each Print type will print the whole image of Design Page on
the first page.
And in this case, the number of pages depends on your design.
Print sewing area box & center axes
Select Print sewing area box & center axes to print black lines to indicate the sewing area (see
“Select Sewing Area”) and the center axes for the data.
This setting is only available when Actual Size is selected.
◆
Click
OK
.
◆
Click Properties to set the printer
properties.
◆
Choose the appropriate Paper
and Orientation settings.
◆
Choose the Print type and Print
Option of the preview image and
sewing information.
◆
Click OK to confirm the settings.
◆
Click Cancel to exit.