Brother PE-DESIGN Ver.432 - Manual (Page 76)

67
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
The shape of the cursor changes to and is displayed together with a small figure of the Tool
Box button. The Sewing Attributes bar now looks like this:
You can select the color and stitch at this step or after applying them to the outline. See “Color” on
page 73 and “Stitch” on page 73.
You can also use the menu (See “Sewing Attributes” on page 85) or the following method to define
the characteristics of the stitch. If you do not make these settings now, the current settings will be
applied, but you can modify them later.
2
Click the outline that you want to set.
The color and stitch selected on the Sewing Attributes bar are applied to the clicked outline.
■ Checking the sewing attributes of an outline
1
Click on the Tool Box.
The shape of the cursor changes to and is displayed together with a small figure of the Tool
Box button.
2
Click the outline using the mouse’s right button.
The Sewing Attributes bar shows the color and stitch for the selection. You can change the color
and stitch at this step (see “Applying the sewing attributes to an outline” above).
The
Sewing Attribute Setting dialog for the selected stitch displays.
◆ If necessary, change the settings.
See “Sewing Attributes” on page 85.
• To restore the default value of a set-
ting after changing it, click the
Default
button at the left of that setting.
◆ To apply the new settings to the out-
line, then click the outline of the pat-
tern(s) using the left button.
◆ Click Close to remove the dialog from
the screen.