Brother PE-DESIGN Ver.432 - Manual (Page 130)

121
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
Operation:
1
Type the desired value on the Edge radius selector (0 ~ 100 mm or 0 ~ 3 , 93 inches) and press the
key or click on the Edge radius selector to display the available values.
2
Click the desired value.
The setting applies to all the patterns that you will create in the Rectangle Drawing mode until you
change the setting.
If a rectangle is selected, the setting also applies to that rectangle.
See also: “Rectangle Drawing Mode” on page 115
■ Path shape
Purpose: Opens and closes broken lines and curves.
Available: When you click or on the Tool Box to start the Line or Curve Drawing
mode.
When you select an existing broken line or curve with the cursor in Selection
mode.
Operation:
1 Click on the Path shape selector.
Two options are available.
2
Click the desired option.
The setting applies to all the patterns that you will create in the Line or Curve Drawing mode until
you change the setting.
If a broken line or curve is selected, the setting applies to that broken line or curve.
See also: “Line Drawing Mode” on page 115, “Curve Drawing Mode” on page 116
Setting Text Attributes
■ Font
Purpose: Selects a font for text.
Available: When you click on the Tool Box to start the Text Input mode.
When you select existing text patterns with the cursor in Selection mode.
When you select characters with the cursor in Point Edit mode.
Enter