Save, Save as, Save • save as – Brother PE-DESIGN Ver.432 User Manual
Page 85: Ve” and “save as” in this section
76
2
The selected file opens immediately if your current Design Page is not edited.
If the current Design Page is edited, you will be asked whether you want to save the changes.
3
Depending on the stage you are currently using and the editing you did, the file to be saved is a
*.pel
file or a
*.pem
file or both.
See also:
“New”, “Save” and “Save As” in this section
■
Save
Purpose:
Saves your Design Page on the disk as latest Version file (default).
NOTE:
Saved
*.pem
files can be opened with Version 1.0 of this software when you select
“PEM Version 1.0” as the File Type”. Note however that some information could be
lost.
Shortcut key:
+
Toolbar:
Operation:
1
Click
File
, then
Save
.
If the file already exists on the disk (the file has been saved at least once during the same stage as
the current one), the file is saved immediately.
2
If the file name is still
Untitled
or if, for any other reason, the file cannot be found on the disk, the
application automatically switches to
Save As
.
See also:
■
Save As
Purpose:
Saves the current file under a new file name.
Shortcut key:
No shortcut key for this function
Toolbar:
No button for this function
Operation:
1
Click
File
, then
Save
As
.
A
Save As
dialog similar to this will display.
◆
Click
Yes
to save the Design Page first.
◆
Click
No
to abandon the Design Page.
◆
Click
Cancel
to do anything else (for
example, modifying the current Design
Page or saving it with another file name).
◆
Select the drive, the folder and type the
file name.
•
The correct extension is automatically
set.
◆
Click
OK
to save.
◆
Click
Cancel
to exit.
Ctrl
S