Line sew – Brother PE-DESIGN Ver.432 User Manual
Page 81
72
When you turn off the region, the region disappears.
When you turn on the region, the region gets the color displayed on the
Region color
button, and
the stitch displayed on the
Region sew type
selector.
See also:
“Color” on page 73 and “Stitch” on page 73
■
Line sew
Purpose:
Switches the outline on/off.
When the outline is switched off, it is not sewn (and you cannot set its color or
stitch).
Available:
When you click
or
on the Tool Box to put the cursor in the Line (all or
parts) sewing mode.
Operation:
1
Click the
Line sew
button.
This button has two states:
on: the Line color button and the Line sew type selector are displayed.
off: the Line color button and the Line sew type selector are not displayed.
2
Click an outline to turn it on or off.
When you turn off the outline, it is replaced by a dotted line that will not be sewn.
When you turn on the outline, the outline gets the color displayed on the
Line color
button, and the
stitch displayed on the
Line sew type
selector.
See also:
“Color” on page 73 and “Stitch” on page 73
Line sew
Line color
Line sew type