Brother PE-DESIGN Ver.432 - Manual (Page 184)

175
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
NOTE:
If an object is larger than the embroidering area or if an object is positioned so that it does not
completely fit within an embroidering area, the error message “Please change the object size or
position.” is displayed instead of this dialog. After the object causing the error appears selected,
change its size or position. (If more than one object causes the error message to appear, the
objects will appear selected in the sewing order.)
■ Design Page Property
Purpose: Allows you to change the size of the Design Page and the color of the Design
Page and the Design Page background.
Shortcut key: No shortcut key for this function
Toolbar: No button for this function
Operation:
1 Click Option , then Design Page Property .
The Design Page Property dialog displays.
The Design Page sizes 130
×
300 mm, 300
×
130 mm, 100
×
172 mm, and 172
×
100 mm, indi-
cated by “*”, are used to embroider extra-large designs using a special embroidery frame attached
to the sewing machine at three installation positions. Check that that you have the extra-large
embroidery frame and that these extra-large designs can be embroidered using your sewing
machine.
See also: “Select System Unit” on page 176
◆ Select the size by clicking the appropriate
radio button.
Select the Page color or the Background color
by clicking its selector arrow, then by clicking
the color.
• The preview area allows you to view the set-
ting changes. The sewing machine picture
shows the direction of the Design Page
(frame) on the machine.
◆ Click OK to confirm.
◆ Click Default to go back to the default setting.
◆ Click Cancel to exit.