Brother PE-DESIGN Ver.432 - Manual (Page 61)

52
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
(If more than one object causes the error message to appear, the objects will appear selected in
the sewing order.)
NOTE:
Make sure that no pattern has been selected before clicking this command. If a pattern has been
already been selected, only that pattern is previewed.
■ Save the data
1 Click File, then Save or Save As, and then save the data.
All of the data is saved as one file (*.pes).
If the file size or the number of color changes is larger than the specified number or if one of the
patterns do not completely fit within an embroidering area, the message “Please change the
object size or position. Do you want to save the data anyway?” is displayed.
NOTE:
The saved file cannot be opened in a previous version (ver. 2.0x or earlier) of Layout & Editing.
NOTE:
If a Design Page for an extra-large embroidery frame (130
×
300 mm, 300
×
130 mm, 100
×
172
mm, or 172
×
100 mm) is selected, you can select only “PES Version 2.5” as the File Type.
■ Write the data to an original card
1 Click File, then Write to Card or click on the Toolbar, and then write the data to an original
card.
Data for an extra-large embroidery frame is created by considering the data for each embroidery
frame installation position as one pattern and combining them.
Therefore, when this type of data is written to an original card, all of the data for one extra-large
embroidery frame pattern is saved as a combination of multiple patterns.
(For more details on the number of patterns that is written to a card, refer to “3. Check data”.)