Brother PE-DESIGN Ver.432 - Manual (Page 183)

174
Bef
ore Using
Design Center
La
y
out & Editing
File Utility
Programmable
Stich Creator
Contents
Quik Ref
erence
Alphabetic Inde
x
Getting Star
ted
Operation:
1
Click Option , then File Utility .
File Utility starts if its window wasn’t open and if it was open, the window comes up front.
■ Design Property
Purpose: Opens a dialog containing sewing information for the selected pattern(s).
Shortcut key: No shortcut key for this function
Toolbar: No button for this function
Operation:
1 Click Option , then Design Property .
The Design Property dialog displays.
This dialog allows you to quickly check the dimensions, the needle count, the color count and color order
of the selected pattern(s).
You can select and check the properties of individual objects composing your embroidery pattern.
If a Design Page for an extra-large embroidery frame (130
×
300 mm, 300
×
130
mm, 100
×
172 mm, or 172
×
100 mm) is selected:
If no object in the Design Page is selected, the following Design Property dialog displays.
When this dialog appears, the Design Page is automatically enlarged or shrunk to fit in the entire window.
The Previous button cannot be clicked when the design corresponding to the first embroidery installa-
tion position is already displayed. In addition, the Next button cannot be clicked when the design corre-
sponding to the last embroidery installation position is already displayed.
◆ Click Close to close the window.
◆ The first line of the dialog shows the position in
the embroidery frame installation order for the
currently displayed design.
• Only the designs that would be sewn at the
current position in the embroidery frame instal-
lation order appear in the Design Page. In
addition, the embroidering area for the current
frame installation position is outlined in red.
◆ Click Previous or Next to display information
for the designs at other positions in the
embroidery frame installation order.