Brother PE-DESIGN Ver.6 - Manual (Page 111)

Advanced Opreation
Design Center
103
Design Center
Stage 4 (Sew Setting Stage)
2.
Use the Thread Width slider to set how wide
the thread will appear.
3.
Use the Contrast slider to set the contrast.
4.
Use the Brightness slider to set how bright
the display is.
5. Click Apply to display a realistic preview of the
patterns with the new settings (when the
realistic preview is displayed).
Or, click OK to save the settings for the next
time that the Realistic Preview function is
select (when the realistic preview is not
displayed).
b
Memo:
To close the dialog box without applying the
changes to the settings, click Close or
Cancel.
c
“Previewing the Sewing Image” on
page 102
Viewing Patterns in the Reference
Window
All outlines and patterns in the Design Page are displayed in the Reference Window, giving you an overall view
of the pattern while you work on a detailed area. The display area frame (red rectangle) indicates the part of
the pattern displayed in the Design Page.
Zooming
The pattern displayed in the Reference Window can
be reduced to fit completely within the Reference
Window or enlarged to display only the pattern.
1. Click .
→ The pattern is displayed so that it fills the
Reference Window.
Moving the display area
frame
The part of the pattern displayed in the Design Page
can be selected from the Reference Window.
1. Move the pointer over the display area frame.
→ The shape of the pointer changes to .
2. Drag the display area frame so that it
surrounds the desired part of the pattern.
→ The selected part of the pattern is dis-
played in the Design Page.
Redrawing the display area
frame
Instead of moving the display area frame, the frame
can be redrawn to display the desired part of the
pattern in the Design Page.
1.
Drag the pointer over the desired part of the
pattern in the Reference Window.
→ The display area frame is redrawn, and
the selected part of the pattern is dis-
played in the Design Page.
PeDesignV6Eng.book Page 103 Thursday, July 8, 2004 11:59 AM