Brother PE-DESIGN Ver.6 - Manual (Page 58)

50
Creating and Editing Embroidery Patterns
3.
Click the frame containing the outline for the
sun’s rays to select it, and then drag the
selected frame between the region for the
sun’s rays and the circle for the sun.
4. Click OK.
→ The sun’s rays will be sewn before the sun
(circle).
If necessary, move the circle so that it looks
centered relative to the sun’s rays.
Step 10
Adjusting the rays
At this time, you might want to modify the rays.
You can do this by moving, deleting and adding
points in the closed broken line pattern.
1.
Click on the Tool Box, and then click
.
→ The shape of the pointer changes to
.
2.
Click the sun’s rays to select it.
→ The points in the pattern appear as small
empty squares.
3. Click the point that you want to move.
→ The selected point appears as a small
black square.
4.
Drag the point to the new location.
c
For details on adding and deleting points,
refer to “Inserting points” on page 136 and
“Deleting points” on page 137.
Step 11
Setting hole sewing
If the sun is sewn according to the current
settings, the sun’s rays will be sewn first, and then
the sun (circle) will be sewn on top of it. In order to
avoid sewing the same region twice, you can
specify hole sewing for a larger region that
completely encloses smaller ones. If hole sewing
is specified, the part of the rays behind the circle
will not be sewn.
PeDesignV6Eng.book Page 50 Thursday, July 8, 2004 11:59 AM