Brother PE-DESIGN Ver.6 - Manual (Page 187)

Advanced Opreation Layout & Editing
179
Layout & Editing
Editing Embroidery Patterns
c
“Previewing the Sewing Image” on
page 187 and “Programmable Stitch
Creator” on page 208
Creating a gradation
The density of one or two colors can be adjusted at
various locations to create a custom gradation
pattern.
1.
In Expert mode of the Sewing Attribute
Setting dialog box, select the Gradation
check box under Region sew.
2. Click Pattern.
→ The Gradation Pattern Setting dialog
box appears.
3. To change the thread color, click . Select
a color in the Thread Color dialog box that
appeared, and then click OK.
4. To select a preset gradation pattern, click the
desired pattern under Select pattern.
5.
Move the sliders to adjust the density of the
gradation pattern.
b
Memo:
The preview area shows the setting changes
that you make.
6.
To blend two colors, select the Use additional
color check box, click under Use
additional color. Select a color in the Thread
Color dialog box that appeared, and then click
OK.
7. Click OK.
b
Memo:
• If the Use additional color check box is
cleared, the gradation settings are applied
to the remaining color.
• To close the dialog box without applying
the changes to the gradation pattern, click
Cancel.
Example 2
Stitch direction: 90°
Example 3
Stitch direction: 0°
PeDesignV6Eng.book Page 179 Thursday, July 8, 2004 11:59 AM