Brother PE-DESIGN Ver.6 - Manual (Page 36)

28
Automatically Creating Embroidery Patterns
2.
Select Photo Stitch 1, then Color, and then
click Next.
→ The Select Mask dialog box appears.
b
Memo:
The following stitch methods are also
available.
• Auto Punch
For more details, refer to page 115.
• Photo Stitch 1 (Mono)
For more details on the Mono setting, refer
to page 120.
• Photo Stitch 2 (Color and Mono)
Refer to page 122 for more details on the
Color setting and to page 124 for more
details on the Mono setting.
• Cross Stitch
For more details, refer to page 125.
• Design Center
For more details, refer to “Using Design
Center” on page 30.
3.
From the list at the bottom of the dialog box,
select the desired shape that the image will be
trimmed to.
4.
In the image preview box, move the handles of
the mask until it surrounds the desired part of
the image to be converted to an embroidery
pattern.
b
Memo:
Any part of the image that is outside of the
mask will not be converted to an embroidery
pattern.
5. Click Next.
→ The image is analyzed, and the Check
Mask Shape dialog box appears.
PeDesignV6Eng.book Page 28 Thursday, July 8, 2004 11:59 AM