Layout & editing, Moving stitch points 1, Inserting stitch points and feeds 1 – Brother PE-DESIGN Ver.6 User Manual
Page 149: Deleting stitch points 1
Advanced Opreation
Layout & Editing
141
Layout & Editing
Editing Embroidery Patterns
• To select an additional stitch point in the
stitching order, hold down the
key
and press the
→
or
↓
key. To select an
additional stitch point in the opposite
direction of the stitching order, hold down
the
key and press the
←
or
↑
key. Holding down the
key and
pressing the opposite arrow key deselects
the stitch point.
• To deselect the current stitch point and
select the following point in the stitching
direction, hold down the
key and
press the
→
or
↓
key. To deselect the
current stitch point and select the previous
point in the stitching direction, hold down
the
key and press the
←
or
↑
key.
• To select all stitch points in the next color,
press the
key. To select all stitch
points in the previous color, hold down the
key and press the
key.
→ Selected points appear as small black
squares.
■
Moving stitch points
1.
Drag the selected stitch points to the new
location.
b
Memo:
• To move the selected stitch point
horizontally or vertically, hold down the
key while dragging it.
• Pressing the arrow keys moves the
selected stitch point 0.1 mm in the
direction of the arrow on the key.
■
Inserting stitch points and feeds
1.
Click a line between two stitch points to add a
new point at that position.
b
Memo:
To insert a stitch point and change the
previous line into a feed, hold down the
and
keys while clicking on
the line.
■
Deleting stitch points
1.
Press the
key to delete the
selected stitch point.
b
Memo:
If the end point of a feed is deleted, that feed
segment is deleted and the stitches before
and after the feed are connected.
■
Editing entry/exit points for each
color of the stitch data
1.
Click
on the Tool Box.
→ Two buttons appear:
.
2.
Click .
→ The shape of the pointer changes to
.
3.
Click the object that you want to edit.
→ The stitch points in the object appear as
small empty squares.
4.
To select the entry point of the first thread
color, press the
and
keys.
To select the exit point of the last thread color,
press
the
and
keys.
To select the entry point of a given color,
select at least one point in that color, and then
press the
key.
To select the exit point of a given color, select
at least one point in that color, and then press
the
key.
a
Note
When selecting stitch points, be sure to click
the stitch point (do not click a blank area of
the Design Page), otherwise all of the
selected points will be deselected.
Shift
Shift
Shift
Ctrl
Ctrl
Tab
Shift
Tab
Shift
Ctrl
Shift
Delete
Ctrl
Home
Ctrl
End
Home
End
PeDesignV6Eng.book Page 141 Thursday, July 8, 2004 11:59 AM