Brother PE-DESIGN Ver.6 - Manual (Page 236)

228
Design Database
→ A Preview dialog box similar to the one
shown below appears.
b
Memo:
To close the dialog box, click Close.
Checking embroidery pattern
information
Sewing information such as the file name, size,
stitch count, color count and modification date can
be checked in the File Property dialog box. With
.pes file, additional information about the
embroidery pattern can be viewed.
Toolbar button:
1. In the contents pane, select the embroidery
pattern corresponding to the information that
you want to view.
2.
Click , or click Display, then File
Property.
→ The Property dialog box appears.
b
Memo:
• The thread colors are displayed as basic
colors. Thread colors in .pes files are
displayed according to the thread colors
set when the file was read by Layout &
Editing.
• To close the dialog box, click Close.
→ If the Design Page was set to Custom
Size, a Property dialog box similar to the
one shown below appears.
b
Memo:
• The first line of the dialog box shows the
position of the displayed pattern section
within the embroidery hoop installation
order.
• To display information for other pattern
sections, click or .
• The pattern sections are displayed in order
from left to right, top to bottom. Pattern
sections that do not contain any stitching
will not be displayed.
• To close the dialog box, click Close.
Non-PES files
PES files
a
Note:
cannot be clicked when the design
corresponding to the first hoop is already
displayed. In addition, cannot be
clicked when the design corresponding to
the last hoop is already displayed.
PeDesignV6Eng.book Page 228 Thursday, July 8, 2004 11:59 AM