Brother PE-DESIGN Ver.6 - Manual (Page 189)

Advanced Opreation Layout & Editing
181
Layout & Editing
Editing Embroidery Patterns
Using the Applique Wizard
The Applique Wizard provides instructions for easily
creating appliqués.
1. Select a pattern with a closed shape, such as
a circle or square.
b
Memo:
• A pattern with lines that cross over
themselves cannot be selected.
• The pattern selected for creating the
appliqué will be deleted after the Applique
Wizard is used.
2. Click Sew, then Applique Wizard.
→ The Applique Wizard dialog box ap-
pears.
3. Under Applique Material, select whether
(Yes) or not (No) the outline of the appliqué is
to be sewn onto the appliqué fabric as a guide
for cutting it out.
4. Under Applique Position, select whether or
not the outline of the appliqué positioning
outline is to be sewn onto the base fabric.
5.
Under Tack down, select whether (Yes) or
not (No) the appliqué is to be basted onto the
base fabric. If Yes is selected, select the
basting stitch from the selector. You can also
select which stitch (satin stitch, E stitch or V
stitch) to use for the basting.
6.
Under Covering Stitch, select the sew type
and other attributes for finishing the appliqué.
7.
Click OK to finish the Applique Wizard and
display the design in the Design Page.
b
Memo:
To quit the operation and close the dialog
box, click Cancel.
E stitch V stitch Satin stitch
PeDesignV6Eng.book Page 181 Thursday, July 8, 2004 11:59 AM