Brother PE-DESIGN Ver.6 - Manual (Page 179)

Advanced Opreation Layout & Editing
171
Layout & Editing
Editing Embroidery Patterns
c
“Line sew” on page 168, “Region sew” on
page 169 and “Specifying sewing
attributes” below
Specifying sewing attributes
Various sewing attributes for lines and regions can
be set in the Sewing Attribute Setting dialog box
Toolbar button:
1. Click one of the Tool Box buttons used to draw
or select objects.
2.
Click in the Toolbar
→ The Sewing Attribute Setting dialog box
appears.
Beginner mode:
Expert mode:
b
Memo:
• An alternate method is to select the menu
command Sew – Setting Attribute.
• The sewing attributes displayed in the
dialog box depend on the selected sew
type.
3.
To display only basic sewing attributes and
simpler settings, click To Beginner mode.
To display all of the sewing attributes and
settings available for the selected sew type,
click To Expert mode.
b
Memo:
• Settings that cannot be selected in
Beginner mode are retained from the
previous setting in Expert mode.
• To hide the preview box, click Hide Hint.
To display the preview box, click Show
Hint.
When the Hide Hint button is displayed,
the preview box is displayed, allowing you
to view a stitching sample when the pointer
is moved over the setting. The preview box
shows the setting changes that you make.
4. If necessary, change the sewing attributes
displayed under Line Sew or Region Sew.
b
Memo:
• In some cases, you may need to scroll
through the settings, or resize the dialog
box by dragging one of its corners in order
to view all of the sewing attributes.
• The method for entering settings varies
according to the attribute. When entering
numerical values in Expert mode, click the
arrow buttons to select the value or enter
the value directly. In Beginner mode, use
the slider to change the settings. If
appears, click the button to return to the
default setting.
c
For details on the different sewing
attributes and settings, refer to “Line
sewing attributes” on page 172 and
“Region sewing attributes” on page 173.
5. Click the Apply button in the dialog box to
apply the new sewing attributes.
6. Click Close to close the dialog box.
a
Note:
All settings made in the dialog box are
retained and will be applied regardless of the
mode, until they are changed.
PeDesignV6Eng.book Page 171 Thursday, July 8, 2004 11:59 AM