Brother PE-DESIGN Ver.6 - Manual (Page 206)

198
Layout & Editing
Saving and Printing
b
Memo:
• To remove the embroidery pattern
selected in the selected patterns list, click
.
• Patterns created on a custom-sized
Design Page are written to cards split into
their various hoop sections.
If the total size of the pattern exceeds the
capacity of the original card or if your hoop
size is 90
×
90 cm (3.54”
×
3.54”) and the
Design Page is split into over 80 sections,
the available space appears in yellow on
the progress bar. When is clicked,
the Select Hoop Sections dialog box
appears, allowing you to select the pattern
sections to be written in the available
space on the card.
The progress bar at the top of the dialog box
shows the available space on the card as
you select pattern sections to be written to
the card. The space used by the selected
pattern sections appears in blue. If, however,
you select a pattern section that exceeds the
size limit, the space used appears in yellow,
and if you select several pattern sections
which exceed the size limit, the space used
appears in red.
Click each pattern section to select it, and
then click Write to write the selected pattern
sections to the card. To deselect a pattern
section, simply click it again. (The Write
button is available only when a section is
selected and the space on the card is
sufficient to receive the selected patterns.)
7. Continue until all embroidery patterns that you
want to write to an original card are selected.
b
Memo:
During this process, the card capacity
indicator allows you to plan which patterns
you would like to save on an original card.
The space used by patterns in the selected
patterns list appears in blue. The space used
by the files selected in the available patterns
list appears in light blue. If several files
exceed the available space, the progress bar
appears in yellow.
8.
After the embroidery patterns to be written to
the original card appear in the selected
patterns list, click to write the patterns to
the card.
→ The patterns are written to an original
card in the order that they are listed after
all data already on the card is erased.
After the patterns are written to the origi-
nal card, the card containing the patterns
can be used with the embroidery ma-
chine.
9.
Click in the upper-right corner of the
dialog box to close the dialog box.
a
Note:
• Since original cards are erased
completely before patterns are written to
it, it is useful to keep a copy with the
contents of each card in the card folder
that comes with the software so that you
can easily recover the files that were on
the card.
• To check the contents of the original card,
open the Browse dialog box, and then
click , which appears at the top of the
list in the Browse window. The patterns
saved on the inserted card appear in the
available patterns list.
• Do not remove the card or unplug the USB
cable while patterns are being written to
the card (while the LED indicator is
flashing).
PeDesignV6Eng.book Page 198 Thursday, July 8, 2004 11:59 AM