Brother PE-DESIGN Ver.6 - Manual (Page 184)

176
Layout & Editing
Editing Embroidery Patterns
Pull Compensation
Lengthens the sewing region in the stitch pattern’s sewing direction to prevent pattern shrink-
age during sewing.
Range: 2–10 mm (0.08–0.39 inch)
Default: 0.0 mm (0.00 inch)
Programma-
ble fill
Select a pattern for programmable fill stitch.
Click , and then, in the Browse dialog box that appeared, select the folder
containing the .pas file that you want to use. Double-click the desired pattern, or
select it, and then click OK.
Width (horizontal length)
Sets the stitch pattern width.
Range: 2–10 mm (0.08–0.39 inch)
Default: 7.5 mm (0.30 inch)
Height (vertical length)
Sets the stitch pattern height.
Range: 5–10 mm (0.20–0.39 inch)
Default: 7.5 mm (0.30 inch)
Direction
Allows you to rotate the angle of the stitch patterns.
Range: 0–359 degrees
Default: 0 degrees
Offset
Direction
Sets the direction of the offset as row/column.
Value
When the pattern’s arrangement is offset, sets the amount of offset.
Range: 0–99%
Default: 0%
Base
Sew
Specifies
the base
stitching.
Stitch
Type
Specifies the shape of stitching on the edges.
Available only when the Base Sew check box is
selected.
Available settings: ,
Default: (for all objects other than text)
(for text)
Step Pitch
Sets the pitch of the stitching for the base of a programmable fill stitch.
Available only when the Base Sew check box is
selected.
Range: 1–10 mm (0.04–0.39 inch)
Default: 4.0 mm (0.16 inch)
Frequency
Sets the spacial frequency steps of the stitching for the base of a programmable
fill stitch.
Available only when the Base Sew check box is
selected.
Range: 0–99%
Default: 30%
0°
45°
90°
135°
180°
225°
270°
315°
row
column
Step pitch
0% 30%
Pattern
The stitching for the base (area
other than the pattern indicated
by the diagonal lines) of the pro-
grammable fill stitch can be set.
The pattern is sewn with the
specified stitching.
PeDesignV6Eng.book Page 176 Thursday, July 8, 2004 11:59 AM