Canon Color imageCLASS MF9280Cdn - Manual (Page 118)

3-35
Storing/Editing One-Touch
Reg
ist
er
ing D
estina
tions in the A
ddr
ess B
ook
If you want to delete the entire number you
entered, press (Clear).
For information on how to set the length of a
pause, see “Communications Settings,” on
p. 13-8.
For information on how to insert a pause for an
overseas number, see “Dialing an Overseas
Number (With Pauses),” on p. 5-22.
You cannot insert a pause or a space at the
beginning of a number.
If you enter a pause at the end of the number,
the pause is always 10 seconds long. –
–
–
–
15
If you want to set the ECM TX, sending
speed, and long distance settings, press
the right Any key to select <Option>.
These settings are optional. If you do not want
to set the optional settings, skip to step 23.
16
Use [ ▼], [▲] or (Scroll Wheel) to select
<ECM TX>, then press [OK].
– 17
Use [ ▼], [▲] or (Scroll Wheel) to select
<On> or <Off>, then press [OK].
18
Use [ ▼], [▲] or (Scroll Wheel) to select
<Sending Speed>, then press [OK].
19
Use [ ▼], [▲] or (Scroll Wheel) to select
the sending speed, then press [OK].
If your document transmissions are slow to start,
it may mean that the telephone lines in your
area are in poor condition. Select a slower
speed. You can select <33600 bps>,
<14400 bps>, <9600 bps>, or <4800 bps>.