Canon Color imageCLASS MF9280Cdn - Manual (Page 483)

12-28
Error Messages
Troubleshooting
Message Description Action
No response from the server.
Check the settings. The specified server settings are
incorrect, or the server is not turned
ON. Alternatively, the machine’s
TCP/IP resources may be low. Wait for a while, and try browsing again.
If you still fail, try selecting another
server.
Not enough TCP/IP resources.
Wait a moment and perform the
operation again. You cannot browse the network due
to a lack of TCP/IP resources. This
may be because documents have
just been continuously sent or are
being continuously sent through FTP
or Windows (SMB). Wait for a while, and try browsing again.
Paper diff. from set size/type. The following did not match when
copying, receiving faxes/I-faxes or
E-mails:
The paper size specified on the
machine
The size of the paper loaded in
the paper drawer
–
•
•
Change the following so that they
match:
Paper size setting on the machine
The size of the paper loaded in the
paper drawer
(See “Loading Paper” on p. 2-10 or
“Setting Paper Size and Type,” on
p. 2-22.)
–
•
•
The following did not match when
printing:
The paper size specified on the
printer driver
The paper size specified on the
machine
The size of the paper loaded in
the paper drawer
–
•
•
•
Change the following so that they
match, and then retry printing:
The paper size specified on the
printer driver
The paper size specified on the
machine
The size of the paper loaded in the
paper drawer
(See “Loading Paper” on p. 2-10,
“Setting Paper Size and Type,” on
p. 2-22 or “Printing Fundamentals,” in
the e-Manual.)
–
•
•
•