Canon Color imageCLASS MF9280Cdn - Manual (Page 398)

Prin
ting
7-17
Printing from Memory Media (Direct Print)
8
Press the right Any key to select <Print
Settings>.
In the <Image Display> mode, the screen below
appears.
9
Use [ ▼], [▲] or (Scroll Wheel) to select
the desired setting, then press [OK].
The followings are the settings that can be
made:
<Color>: Selects full color or B&W.
<Drawer 1>: Selects paper for printing.
You cannot set <Stack Bypass Tray> when the
custom size is specified for the stack bypass tray.
–
–
<Layout>: Specifies the layout.
To make this setting, see the detailed procedures
in the next page.
<Copies>: Selects print quantity.
<Print Date>: Prints the shooting date on
data.
To make this setting, see the detailed procedures
in the next page.
<Print File Name>: Prints the file name on
data.
To make this setting, see the detailed procedures
in the next page.
<Vivid Photo>: Makes green and blue more
lively.
<Brightness>: Adjusts brightness.
<Halftones>: Optimizes data for printing.
The <Halftones> default setting is <Auto>.
<Gradation> is suitable for photos taken with a
digital camera and <Error Diffusion> is suitable
for scanned images. In <Auto> mode, printing
from a memory card is automatically processed
with <Gradation> and printing from USB
memory is automatically processed with <Error
Diffusion>. For optimal images, select <Error
Diffusion> when printing scanned images
stored in memory cards. When printing photos
stored in a USB memory, select <Gradation>.
<Copies> can be set up for each file, but the
other print settings cannot be specified for
each file. –
–
–
–
–
–
–
–
–