Canon Color imageCLASS MF9280Cdn User Manual
Page 486
 
12-31
Error Messages
Troubleshooting
Message
Description
Action
Remove the jammed paper from 
inside the front cover.
A paper jam occurred inside the 
front cover.
–
Check the location of the paper jam 
and remove the jammed paper. Press 
the right Any key to display the next 
procedure. For detailed instructions, 
see “Inside of the Machine,” on 
p. 12-13.
–
A paper jam occurred because 
the paper loaded in the paper 
drawer is different from the paper 
specified in <Paper Settings> and 
the printer driver screen.
–
When printing, follow the instructions 
below.
1. Reload the correct size of paper into 
the paper drawer. (See “Reloading 
the Paper,” on p. 12-42.)
2. Remove the jammed paper and
close the front cover. When 
removing the paper, be careful 
not to touch the transfer belt of 
the delivery feeder unit or toner 
cartridge.
When copying, follow the instructions 
below.
1. Reload the correct size of paper into 
the paper drawer or stack bypass 
tray. (See “Reloading the Paper,” on 
p. 12-42.)
2. Remove the jammed paper and
close the front cover. (See “Inside of 
the Machine,” on p. 12-13.)
3. Wait a while until the job resumes.
–
–
Remove the jammed paper from 
XXX. (XXX indicates the location of 
the jam.)
A paper jam occurred at the location 
shown on the display.
Check the location of the paper jam 
and remove the jammed paper. Press 
the right Any key to display the next 
procedure. For detailed instructions, see 
“Clearing Jams,” on p. 12-2.
Remove the paper, and close the 
tray.
A paper jam occurred in the stack 
bypass tray.
Check the location of the paper jam 
and remove the jammed paper. Press 
the right Any key to display the next 
procedure. For detailed instructions, see 
“Stack Bypass Tray,” on p. 12-8.
Replace the toner cartridge. (XXX) 
(XXX indicates “Black”, “Yellow”, 
“Cyan”, or “Magenta”.)
When the toner runs out.
Replace the toner cartridge of the 
indicated color. Incidentally, even if any 
of Yellow, Cyan or Magenta toner runs 
out, black and white printing can still be 
performed if Black toner remains.