Canon Color imageCLASS MF9280Cdn - Manual (Page 485)

12-30
Error Messages
Troubleshooting
Message Description Action
Press the OK key. [Stop] has been pressed while
scanning the document using the
feeder. Press [OK], then set the originals again.
Printer Error Some kind of error has occurred in
the machine. Turn OFF the main power switch, wait
for more than 10 seconds, then turn it
ON again. If the message persists, take
a note of the error code that appears
on the bottom left of the display, turn
OFF the main power switch, disconnect
the power cord, and contact Canon
Customer Care Center.
Received in memory. The machine temporarily received
the data in memory because an error
of some kind has occurred in the
machine. This error message appears
with one of the messages below.
<Load paper.>, <A cover is open.>,
<Check that all of the covers are
closed.>, <The paper has jammed.>,
<Remove the jammed paper
from...>, <Replace the toner.> This error message appears with another
message. When the error is resolved, the
received data will be printed out. For
how to solve the problem, see the action
for the messages displayed with it.
Remove the jammed paper from
inside the cover of the feeder. A paper jam occurred inside the
cover of the feeder. Check the location of the paper jam
and remove the jammed paper. Press
the right Any key to display the next
procedure. For detailed instructions, see
“Original Jams,” on p. 12-3.