Canon Color imageCLASS MF9280Cdn - Manual (Page 468)

12-13
Clearing Jams
Troubleshooting
1
Open the front cover
If you are using the stack bypass tray, close it
before opening the front cover.
Open the front cover gently holding the handle
(A).
When removing jammed paper, be sure to
place paper on the transfer belt (A) of the
delivery feeder unit to protect the belt. –
Do not place any object on or touch the
transfer belt (A) of the delivery feeder unit. The
transfer belt (A) of the delivery feeder unit is
supplied with a function that cleans itself,
therefore, do not clean the belt even when the
toner is on it. If the delivery feeder unit is
broken or transfer belt (A) is damaged, this may
result in misfeeds or deterioration in print
quality.
If the size of the paper loaded in the paper
drawer differs from the paper size set in the
<Paper Settings> or the paper size set on the
printer driver, a paper jam may occur. If this is
the case, load the correct size paper before
removing the jammed paper.
If you remove the jammed paper before
re-loading the correct size paper, another
paper jam may occur. Make sure to re-load the
correct size paper before removing the
jammed paper.
–
–
–
Inside of the Machine
If a screen similar to the one shown below appears on the display, remove the jammed paper from the inside
of the machine. Then press the right Any key to display the next procedure.