Canon Color imageCLASS MF9280Cdn - Manual (Page 16)

Installa
tion R
equir
emen
ts and Handling
xv
Installation Requirements and Handling
Installation Requirements and Handling
Temperature and Humidity
Conditions
Temperature range: 50 °F to 86 °F (10 °C to 30 °C)
Humidity range: 20 % to 80 % RH (no condensation)
Protecting the machine from condensation
To prevent condensation from forming inside the
machine in the following cases, let the machine adjust
to the ambient temperature and humidity for at least
two hours before use.
When the room where the machine is installed is
heated rapidly
When the machine is moved from a cool or dry
location to a hot or humid location
If water droplets (condensation) form inside the
machine, this can result in paper jams or poor print
quality.
When using an ultrasonic humidifier
When you are using an ultrasonic humidifier, it is
therefore recommended that you use purified water or
other water that is free of impurities. If you use tap water
or well water, impurities in the water will be dispersed
through the air. This can be trapped inside the machine,
causing degradation in print quality.
Power Supply Requirements
120 V to 127 V 60 Hz
Precautions when connecting the power cord
Do not connect this machine to an uninterruptible
power source.
Use an AC power outlet exclusively for the machine. Do
not use the other sockets of the AC power outlet.
–
–
–
•
•
–
–
–
Do not plug the power plug into the auxiliary outlet on
a computer.
Do not use the same AC power outlet for both the
machine and any of the following equipment.
Copy machine
Air conditioner
Shredder
Equipment that consumes a large amount of
electricity
Equipment that generates electrical noise
When unplugging the power cord, keep interval of 10
seconds or more before plugging it again.
Miscellaneous precautions
The maximum power consumption of the machine is
as follows.
Color imageCLASS MF9280Cdn/MF9220Cdn: Less than
1300 W, 1350 W (with optional equipment)
Electrical noise or a dramatic drop in mains voltage may
cause the machine or computer to operate incorrectly
or lose data.
Installation Requirements
A location with sufficient space
A location with good ventilation
A location with a flat, even surface
A location able to fully support the weight of the
machine
Do not install the machine in the following locations,
as this may result in damage to the machine.
A location subject to dramatic changes in temperature
or humidity
A location subject to condensation
–
•
•
•
•
•
–
–
–
–
–
–
–
–
–
In order to use this machine in a safe and trouble-free manner, install the machine in a place
that fulfills the following conditions. Also, read the remarks carefully.