Canon Color imageCLASS MF9280Cdn - Manual (Page 230)

Fax
5-9
Introduction to Using Fax Functions
DRPD Mode
DRPD (Distinctive Ring Pattern Detection) service assigns two or more telephone numbers with distinctive
ring patterns to a single telephone line, allowing you to have both a fax number(s) and a telephone number(s)
using only one telephone line. Your fax will automatically monitor incoming calls and based on the ring
pattern, will let you know if the call is a fax or voice call. Set the fax ring pattern that matches the pattern
assigned by your telephone company. Contact your telephone company for availability.
Before using this mode
Make sure to do the following:
Subscribe to a DRPD service. Contact your telephone company for availability.
Connect your external telephone to the machine. (See “Introduction of the Machine,” in the e-Manual.)
Set the receive mode to <DRPD>. (See “Selecting the Receive Mode,” on p. 5-9.)
Selecting the Receive Mode
Select the fax receive mode to suite your needs.
The default setting is <Auto RX>.
●
●
–
–
–
1
Press (Main Menu).
2
Press the right Any key to select
<Additional Func.>.
3
Use [ ▼], [▲] or (Scroll Wheel) to select
<Communications Settings>, then press
[OK].
4
Use [ ▼], [▲] or (Scroll Wheel) to select
<Fax Settings>, then press [OK].